1. INSTALL FRONT NO. 1 STABILIZER BAR BUSH

(a) Install the 2 bushes to the outer side of the bush stoppers on the front stabilizer bar as shown in the illustration.

NOTICE:

Be sure to install the front No. 1 stabilizer bar bushes so that the cut and bump of each bush faces the front of the vehicle.

2. TEMPORARILY INSTALL FRONT STABILIZER BAR

(a) Temporarily install the front stabilizer bar with the 4 bolts and the stabilizer bracket LH and RH.

3. TIGHTEN FRONT STABILIZER BRACKET

(a) Tighten the 4 bolts.

Torque: 69 N·m (704 kgf·cm, 51 ft·lbf)

4. TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY LH

(a) Temporarily install the stabilizer link with the nut and bolt.

(b) Tighten the nut.

Torque: 150 N·m (1530 kgf·cm, 111 ft·lbf)

5. TEMPORARILY INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedure for both sides.

7. TIGHTEN FRONT STABILIZER LINK ASSEMBLY LH

(a) Tighten the bolt.

Torque: 120 N·m (1224 kgf·cm, 89 ft·lbf)

8. TIGHTEN FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedure for both sides.